May 2022 update on steam locomotive 7812 Erlestoke Manor

Roger Smith - Contributor Add a Comment 3 Min Read
Front of 7812 // Credit: Erlestoke Manor Fund

The has released its May 2022 update of progress in restoring GWR Manor Class steam locomotive No.7812 Erlestoke Manor.

7812 with boiler clad
7812 Erlestoke Manor with boiler and firebox clad and BR green topcoat paint applied. Credit: Adrian Hassell.

Since March, the focus has been on lagging and cladding the boiler and firebox, fitting out the cab pipework and floor, painting the locomotive, and recommissioning a 3,500 gallon tender to be paired with Erlestoke Manor.

By the end of April, reassembly of the pipework was well underway, and they had laid out steelwork for a new cab floor prior to cutting and welding.

Preparing the fireman's cab side for lining out. Credit: Terry Jenkins.

At the beginning of May, the fireman's cab side had been lined out, and with the boiler and firebox now clad BR green topcoat paint had been applied, with some rubbed down parts awaiting further coats, and the smokebox painted. Some finishing touches have also been completed in readiness for when they are needed such as lining out the cab side numberplates.

Fireman's cab side lining out completed. Credit:: Adrian Hassell.

The tender has been in store at Locomotive Works since summer 2019, having been paired with 7802 Bradley Manor until that locomotive suffered a piston rod failure.

Prior to that, the tender was paired with Erlestoke Manor from 2008 to 2017. It is now being recommissioned for use with 7812 again, including a full examination, some light repairs, and a partial repaint.

Bitumen paint has been applied to protect the coal space, and an undercoat has been applied to the rear buffer beam.

A team of volunteers from the West Somerset Railway has restored the paint finish on the tender tank. Although the previous paint work was still of a high quality with few areas requiring any remedial touching up, the top surface was well ingrained with general dirt and brake dust from its previous period in traffic. The finish was restored by first removing the ingrained dirt, then using Clay Bar to take the previous coats of varnish off. The end results provided a sound surface for local touching up followed by revarnishing to match 7812.

Share This Article
Leave a comment

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Exit mobile version
X