Construction of Gresley P2 No. 2007 Prince of Wales took a major step forward at the A1 Steam Locomotive Trust’s Summer Supporters’ Day, when the locomotive’s three-cylinder monobloc was successfully lowered into the frames.
The monobloc was made by Howco Ltd of Ayrshire, Scotland, and is one of the P2’s most complex components.
The monobloc’s design, led by the Trust’s former Engineering Director, David Elliott, has refined Sir Nigel Gresley’s original design to overcome known shortcomings, including balancing the clearance volumes between the cylinders and reducing the heat transfer between the inlet and exhaust steam.
Unfortunately, David passed away in 2023, so he was unable to witness this landmark achievement, but his meticulous engineering and attention to detail ensured the installation went smoothly.

Lifting of the monobloc into position was carried out by a 15-tonne overhead crane, which was delivered to Darlington Locomotive Works earlier this year and was its first major task.
The final stages of the operation to lift the monobloc into position were witnessed by those attending the Summer Supporters’ Day.
The assembly will now be checked to ensure that it is in the correct alignment before the fitting of bolts to secure the monobloc permanently within the frames.
Prince of Wales has an innovative rotary cam poppet valve gear, which is based on the Lentz system and has been developed by David Elliott.
The design has already been successfully demonstrated with full-size 3D-printed prototypes of the cambox, thereby allowing the manufacture of the final metal components to proceed.

The boiler for Prince of Wales is being manufactured at Meiningen in Germany.
“This has been a major engineering challenge and is probably the first three-cylinder monobloc to be installed in a main line steam locomotive for more than 60 years, if not considerably longer. The team at Darlington Locomotive Works should be immensely proud of this achievement as they continue to build upon the legacy of David Elliott’s talent and vision. During this 150th anniversary year of Sir Nigel Gresley’s birth, it is especially fitting to recognise the foresight and ingenuity of two remarkable engineers whose work has shaped this locomotive.”
P2 Project Director, Richard Courteney-Harris



Responses
Fantastic achievement. A monobloc created in 2026 for a new engine. Will this persuade the NRM to consider a new monobloc for 60800 Green Arrow. A superb loco which I had pleasure of firing and driving a few years ago
Would it be possible to adapt the monobloc casting so that V2 “Green Arrow” could run again?