Suppliers sought for new Bi-Mode locomotives for TransPennine Express and Great Western Railway

Michael Holden - Editor 5 comments 4 Min Read
TPE Class 68 at York // Credit: Dan Sutcliffe

is looking for expressions of interest from suppliers for a fleet of at least 15 bi-mode locomotives for use on with its Mk5 carriages.

The provision released by First Group is for up to 30 bi-mode locomotives, with an additional 5 for use on 's Sleeper Service.

The operators say that the new locomotives must have the capability to be powered by overhead wires as well as being able to operate with an alternate traction mode, IE Diesel or Battery, where routes are not yet electrified or for use as a contingency.

In the supporting information for the EOIs, TransPennine Express says that any engine must meet at least Euro V compliance and must meet all NTSN standards in relation to noise.

TPE also says that the locomotives must be able to travel at up to 100mph.

TransPennine Express wants to use the new bi-mode locomotives with its current CAF MK5A carriages and must be modified for use with the control systems for Automatic Selective Door Operation (ASDO) as well as other controls and passenger information systems (PIS).

TransPennine Express Class 68
Credit: Harry Gribbins

Whilst the current formation of trains for TPE is 5-cars made up of 4 carriages and Driving Trailer for push-pull operation with the current Class 68s, TPE says that the new locomotives should be able to operate with up to 7 cars.

The new bi-mode locomotives are expected to be used anywhere on the TPE network, the operator says, but also adds that the primary operation for the locomotives will be on the following routes.

  • TPE South Route between Liverpool, Warrington, Manchester, Sheffield and Cleethorpes
  • TPE North Route between Liverpool, Newton-le-Willows, Manchester, Huddersfield, Leeds, Hull or York and then onto Scarborough, Middlesbrough, Redcar, Saltburn or Newcastle.

Some of these routes are electrified, with more expected thanks to the TransPennine Route Upgrade project.

Great Western Railway needs the new locomotives to be able to operate with up to 9 Mk3 carriages on its Night Riviera Sleeper Service and must be capable of operating on the Paddington to Penzance route with consideration being made for the routes gradients. Maintenance on the GWR locomotives will be carried out by GWR staff at Longrock Depot, Penzance and Reading.

Paul Staples, Fleet Director at TransPennine Express, said: “In collaboration with our sister FirstGroup train company, GWR, we have invited expressions of interest from the rail industry for potential alternatives to our existing fleet of Class 68 locomotives and those operating GWR's Riviera Sleeper service.

“The Class 68s are currently used to provide power for our Nova 3 Mk5a trains, and are reliable, powerful and flexible locomotives. However, we want to explore options to operate these trains using more sustainable technology in the future.

“We are determined to make a positive impact for the environment and make rail, which is already one of the most environmentally friendly modes of transport, even greener.

“Our request for expressions of interest sets out to test the availability in the marketplace of bi-mode locomotives capable of running on either diesel or electricity, allowing our Mk5a trains to take advantage of clean and efficient energy when operating on electrified sections of our routes.

“This is a very early step in a potential locomotive replacement programme, exploring what may be possible and viable, and we are very interested to hear from potential supply partners in the industry.”

More information is available on the First Group website.

Share This Article
5 Comments
  • Maybe Stadler could continue on manufacture more Class 88 Bi-Mode locomotives for GWR Night Riviera s leeper s ervice and CAF to continue on manufacturing the MK5A carriages.

    • The 88s are rubbish on diesel – the spec is for 100mph on diesel hauling 7 or 9 carriages at 100mph. Not what their diesel engines were designed for. Meanwhile CAF can continue to manufacture as many Mk5a carriages as it wants but whether the DfT will allow them to be purchased is a completely different matter. Currently the answer from the Treasury is a resounding “no”…

    • Maybe the Class 93 would be a better option for these trains?

      A small fleet have already been ordered by Rail Operations Group….

      • The Class 93 will still be underpowered in self powered mode, very much still a last mile solution in reality. The specification for the new Bi-modes for Transpennine and GWR say that it must be able to match, or exceed the performance of a Class 68 with up to 7 Mk5’s or 9 MK3’s taking into account gradients when on diesel power. I think we can expect that such a locomotive will have the same engine as a 68, and around 5,000hp on electric. They’re working on fitting all the equipment into the British loading gauge hence the long lead time, and no set delivery date.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Exit mobile version
X